[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
RE: (erielack) DCC Problems with Atlas Trainmaster
Hello Bob:
Its an Atlas HO scale Trainmaster. Its set up for sound but the speaker
holder is blank and came with a factory installed DC board.
Thanks!
J
- -----Original Message-----
From: Bob Clegg [mailto:bobcatcs_@_comcast.net]
Sent: Monday, October 15, 2012 6:58 AM
To: EL Mail List
Subject: Re: (erielack) DCC Problems with Atlas Trainmaster
Josh,
Contact me off list at bobcatcs_@_comcast.net. I can probably help.
First question: trainmaster manufacturer?
Thanks and regards,
Bob
On 10/14/2012 10:09 PM, Joshua K. Blay wrote:
> I have two Trainmasters that came without sound and DCC that I am working
on
> "chipping." Digitrax recommends, among others, their DH165A0 board but
this
> is a much shorter board, and the secondary suggestion was DH165Q1. The
> chip, while promising, does not make allowances for the two snap tabs (it
> has allowances for four screw holes) and five two prong connectors must be
> plugged in, while I can only locate places for four and I am not sure
which
> four go where.
>
>
>
> Would be ever so grateful for any help.
>
>
>
> Thanks!
>
>
>
> Joshua
>
>
>
> The Erie Lackawanna Mailing List
> http://EL-List.railfan.net/
> To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html
>
The Erie Lackawanna Mailing List
http://EL-List.railfan.net/
To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html
- -----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2441/5331 - Release Date: 10/14/12
- -----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2441/5331 - Release Date: 10/14/12
The Erie Lackawanna Mailing List
http://EL-List.railfan.net/
To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html
------------------------------