Re: (erielack) DCC Problems with Atlas Trainmaster

[Bob Clegg <bobcatcs_@_comcast.net>]

Josh,

Contact me off list at bobcatcs_@_comcast.net.  I can probably help.  
First question:  trainmaster manufacturer?

Thanks and regards,

Bob

On 10/14/2012 10:09 PM, Joshua K. Blay wrote:
> I have two Trainmasters that came without sound and DCC that I am working on
> "chipping."  Digitrax recommends, among others, their DH165A0 board but this
> is a much shorter board, and the secondary suggestion was DH165Q1.  The
> chip, while promising, does not make allowances for the two snap tabs (it
> has allowances for four screw holes) and five two prong connectors must be
> plugged in, while I can only locate places for four and I am not sure which
> four go where.
>
>   
>
> Would be ever so grateful for any help.
>
>   
>
> Thanks!
>
>   
>
> Joshua
>
>
>
> 	The Erie Lackawanna Mailing List
> 	http://EL-List.railfan.net/
> 	To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html
>


	The Erie Lackawanna Mailing List
	http://EL-List.railfan.net/
	To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html

------------------------------