[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
(erielack) Branchline 40' boxcar news
- Subject: (erielack) Branchline 40' boxcar news
- From: "Tupaczewski, Paul R \(Paul\)" <"paultup_@_lucent.com">
- Date: Thu, 29 Jun 2000 13:52:35 -0400
Thanks to Rob for forwarding this to me from the Freight Car list... for
those of you who bought one of Branchline's Erie 40' boxcars, read on... :)
- -----Original Message-----
From: bill <"bill_@_branchline-trains.com">
To: The Freightcars List <"freightcars_@_sunny16.photo.tntech.edu">
Cc: "HAWK0621_@_aol.com" <HAWK0621@aol.com>; rhendrickson@opendoor.com
<"rhendrickson_@_opendoor.com">
Date: Wednesday, June 28, 2000 11:58 AM
Subject: [FC] Branchline 40' boxcar news
>Friends and fellow freight car list members...
>
>A few weeks ago we shipped the first batch of our 40' Blueprint Series =
>boxcar kits. These cars were to be the second major series of kits in =
>our Blueprint line. After the initial release we discovered that these =
>cars scale out approximately 8" too long in the body and 1 scale foot =
>too long (.1377 inch, or slightly more than 1/8" actual) in wheelbase. =
>This was due to an inaccurate dimension on one of the drawings that we =
>used to tool the kit. As you can imagine, this was not good news! The =
>discrepancy is noticeable only when our car is positioned next to =
>another 40' boxcar or if the modeler attempts to kitbash our car using =
>aftermarket roofs, frames or roofwalks. This error is present in all of =
>our Blueprint Series 40' boxcars. This error is NOT present in any of =
>the other existing or upcoming Branchline kits for which tooling has =
>been completed!
>
>Branchline Trains has tried to achieve a high level of accuracy in our =
>Blueprint series kits. This type of error is not consistent with that =
>goal and as a result we are going to re-tool the incorrect sections of =
>these cars in order to correct the problem. However, due to our =
>extremely busy tooling schedule it will be some time before this re-tool =
>can be completed. We ARE committed to correcting the problem and will do =
>our best to be sure that this type of error never happens again!
>
>Thanks for your understanding,
>
>Bill Schneider
>Branchline Trains
>
------------------------------------------------------------
Visit the erielack photopage at http://el-list.railfan.net
------------------------------