RE: (erielack) Polly S paint

["Paul R. Tupaczewski" <paultup_@_optonline.net>]

Personal experience: I usually thin it only 10% with distilled water (I
understand alcohol works even better). I spray it at 25 psi. Do LIGHT
coats with it! The runs seem to be an indication of spraying too closely
and too many passes in a row...

	- Paul


> -----Original Message-----
> From: erielack-owner_@_lists.railfan.net 
> [mailto:erielack-owner_@_lists.railfan.net] On Behalf Of 
> Michael Dickinson
> Sent: Tuesday, March 18, 2003 10:05 PM
> To: erielack_@_lists.Railfan.net; RAILROADmodeler@yahoogroups.com
> Subject: (erielack) Polly S paint
> 
> 
> Listers, I am having trouble with this paint. I am using the 
> caboose red color and it just seems to be too thin. It just 
> runs down the side of the caboose. What percent do you thin 
> this paint? Do you use water like the bottle says or use 
> something different?  I am using an airbrush and spraying at 
> about 20 PSI. Thanks for your replies Mike Dickinson
> 
> 

------------------------------